Ключевые слова: REBCO, coated conductors, cable-in-conduit conductor, design parameters, fusion magnets, heat capacity, critical current, angular dependence, quench properties, thermal-hydraulics, normal zone propagation, RRR parameter, twist-pitch, contact characteristics, resistance, n-value, magnetic field dependence, HTS
Ключевые слова: Tokamak, HTS, Bi2223/AgAu, current leads, design, design parameters, temperature distribution, resistance, RRR parameter, cryogenic systems, helium, flux flow
Ключевые слова: cyclotron, proton irradiation, medical applications, surface
Ключевые слова: power equipment, power transmission lines, SMES, battery storage, hybrid systems, modeling, numerical analysis
Zhang W., Xu Y., Bi Y., Shi J., Li Q., Wang J., Zheng J., Chen X., Liu X., Zhao Y., Tang Y., Song Y., Zhu J., Deng Z., Coombs T., Ren L., Shen B., Jin J., Xiang B., Sheng G., Islam M.R.*10, Guo Y.*11, Zhu J.*12
Ключевые слова: large-scale applications, HTS, magnets, Tokamak, Maglev system, flux pumps, power equipment, cables, SMES, FCL, coated conductors, LTS, Nb3Al, review
Ключевые слова: HTS, REBCO, coated conductors, stacked blocks, twisting, cable-in-conduit conductor, quench properties, modeling, thermal-hydraulics, contact characteristics, resistance, DEMO, central coils, coils solenoidal, magnetic field distribution, critical caracteristics, critical current distribution, temperature distribution, interstrand contact resistances, normal zone propagation, hot spots, numerical analysis
Ключевые слова: HTS, YBCO, coated conductors, coils pancake, coils racetrack, modeling, quench propagation, thermal conductivity, design parameters, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, soldered-stacked-square wire, twisting, design parameters, strands, quench, modeling, cable-in-conduit conductor, thermal-hydraulics, critical caracteristics, critical current distribution, angular dependence, inductance, hot spots, minimum quench energy, quench propagation, pressure distributions, heat transfer, interstrand contact resistances
Xie Y., Song Y., Wang C., Sborchia C., Smith K., Wu W., Wu H., Lu K., Shen G., Wei J., Readman P., Valente P., Hu X.Y.
Ключевые слова: ITER, coils poloidal field, coils pancake, design, cryogenic systems, cycling, thermal performance, fabrication, test results, measurement setup
Mitchell N., Lee S., Yang Y., Bauer P., Taylor T., Heller R., Yamada S., Li J., Zhou T., Devred A., Ichihara T., Song Y., Huang X., Liu C., Liu C., Ballarino A., Ding K., Lu K., Gung C.Y., Spina T., Niu E., Han Q., Ran Q., Dong Y., Du Q.
Ключевые слова: ITER, current leads, HTS, coils toroidal, coils poloidal field, central coils, operational performance, design, Bi2223, tapes, prototype
Ключевые слова: medical applications, accelerator magnets, proton irradiation, eddy currents, modeling, numerical analysis, facility
Ключевые слова: Tokamak, coils toroidal, electromagnetic forces, design, LTS, Nb3Sn, cable-in-conduit conductor, DEMO, ITER, comparison, mechanical properties, stress distribution
Ключевые слова: HTS, YBCO, coated conductors, substrate magnetic, ac losses, numerical analysis
Ключевые слова: Tokamak, magnets, central coils, HTS, Bi2212, wires round, cable-in-conduit conductor, joints, design, fabrication, joint resistances, temperature distribution
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.